NOVOTEST T-U2 is the best price hardness tester in the world that works on UCI (Ultrasonic Contact Impedance) technology.
Unlike the Leeb hardness tester, such as the Leeb Hardness Tester NOVOTEST T-D2 and the Leeb Hardness Tester NOVOTEST T-D3, UCI hardness tester can also be used with small or thin-walled products, as well as parts of complex shape or with areas that need to be tested in hard-to-reach places.
The device with wide functionality and high reliability is UCI Hardness Tester NOVOTEST T-U2. This is a device that has been manufactured by our company for more than 10 years, and has established itself as the most optimal option in the world market for the combination of price – quality.
The main advantages of the UCI Hardness Tester NOVOTEST T-U2 are:
THIN-WALLED PRODUCTS MESURING
The UCI Hardness Tester NOVOTEST T-U2 can be used for samples from 1 mm, and even less with special tool for thin sheets.
MEASURING HARDNESS OF SMALL PRODUCTS
Using this device, the operator can, without additional fixation and accessories, carry out hardness testing of products weighing just 100g or even less.
MEASURING HARDNESS OF COMPLEX SHAPED PRODUCTS
The UCI Hardness Tester NOVOTEST T-U2 main purposes are products of complex shape (gear teeth, bearings etc.) and hard-to-reach places that need to be tested (grooves, radius surfaces, welds and heat affected zones etc.)
The imprint after measuring with UCI hardnes tester is very small, the method is considered the most non-destructive of the known implemented in portable hardness testers. Also, the shallow penetration of the indenter makes it possible to measure the hardness of hardened layers, such as nitriding, cementation, etc.
VARIOUS PROBE’S TYPES
The UCI Hardness Tester NOVOTEST T-U2 can be equipped with probes with different loads according to customer choice. Descriptions of possible options are presented in the table below:
The UCI Hardness Tester NOVOTEST T-U2 probe has a nozzle that helps the user to maintain the perpendicularity of the indenter penetration into flat surfaces, which significantly reduces the possibility of operator error. Also, using a special washer, the UCI probe can be installed on radial surfaces, or it can be used without a nozzle at all to measure the hardness of small parts and grooves.
The UCI Hardness Tester NOVOTEST T-U2 comes with a shockproof silicone case that prevents the device from malfunctioning when dropped from a height of up to several meters, which makes the device reliable and durable.
UCI Hardness Tester NOVOTEST T-U2 also comes with special software for operate with the device archive and subsequent data transfer for processing in convenient formats.
- Possibility of measuring the hardness value of products with any weights and thickness from 1 mm (small items, thin-walled structures, pipes, tanks, steel sheets, the products of complex shape, hardness control of metal coatings, etc.) and from 100g.
- Small imprint on the surface of the tested product (user can test mirror surfaces, necks shafts, knives, gear teeth, etc.)
- Hardness testing the hardening layer of the surface
- Wide range of hardness measuring
- Usability of measuring
- Minimum number of controls
- Extended temperature range (frost protected, operating temperature up to -20 °C)
- Device has internal memory and allows user to connect with PC
- Intuitive menu
|Range of hardness
– Rockwell, HRC
– Brinell, HB
– Vickers, HV
|20 – 70
90 – 650
230 – 940
|Standards||ASTM A1038, ASTM E140|
|Storage of measurement results||256|
|Operating temperature range, ° C||-20 to +40|
|Power||2pcs AA batteries|
|Bateries life, hours, not less||20|
|Weight of electronic unit with batteries, no more, kg||0.2|