Description
The Model 4830 Push-In Pressure Cell is designed to be pushed in place for the measurement of total pressures in soils and earth fills. Where effective stress is required, the cell is fitted with an integral piezometer. A thread is provided on the end of the cell to allow for installation using lengths of pipe or drill rods.
Spesification
| Standard Ranges¹ | 70, 170, 350, 700 kPa; 1, 2, 3, 5 MPa |
| Over Range | 150% F.S. (maximum) |
| Resolution | 0.025% F.S. |
| Accuracy² | ±0.1% F.S. |
| Temperature Range¹ | −20°C to +80°C |
| Length × Diameter¹ | 600 × 50 mm |
¹Other ranges and sizes available on request.
²Transducer accuracy established under laboratory conditions.
Total system accuracy (pressure transducer + pressure cell) is subject to site-specific variables.
