Description
The optoNCDT 1191 time of flight sensors provide maximum measuring range with and without reflector. A heater is integrated in the laser distance sensor specially for outdoor use. Typical applications are position measurement of gantry cranes or ships in ports.
Spesification
| Model | ILR1191-300 |
| Measuring range black 6% | 1 ... 150m |
| Measuring range grey 10% | 0.5 ... 200m |
| Measuring range white 90% | 0.5 ... 300m |
| Measuring range reflector | 300 ... 3000m |
| Speed | 0ms-1 ... 100ms-1 |
| Linearity | ±20mm (at measurement output 100Hz) ±60mm (at measurement output 2kHz) |
| Resolution | 1mm |
| Repeatability | ≤20mm |
| Response time distance measurement | 0.5ms |
| Response timespeed measurement | 12ms |
| Laser class measuring laser | 905nm, laser class 1 |
| Laser class sighting lase | 635nm, laser class 2 |
| Operation temperature | -40°C … +60°C |
| Storage temperature | -40°C … +70°C |
| Limit outputs | QA/QB (max. 200mA) |
| Switching points | free adjustable |
| Switching hysteresis | free adjustable |
| Trigger input | trigger edge and trigger delay programmable, trigger pulse max. 30V |
| Serial interface |
RS232 and RS422 with 1.2kBaud … 460.8kBaud SSI interface (RS422), 24Bit, Gray-encoded 50kHz … 1MHz |
| Profibus | RS485, 9.6 kBaud … 12MBaud |
| Operation mode | single/continuous measurement, external triggering (adjustable near field elimination), |
| Analog output | 4 … 20mA (16 Bit DA) |
| Temperature stability | ≤50ppm / °C |
| Supply | 10 … 30 V DC |
| Max. consumption | |
| Connection | 1 x 12-pin M16, 2 x 5-pin M12 B-coded |
| Protection class | IP 67 |
| Material (housing) | aluminium strangeness profile, powder-coated |
| Weight | 800g (depends on equipment) |
| Vibration/Shock | 500g, 0.5ms, 1 shock /axis (DIN ISO 9022-30-08-1) |
| 10g, 6ms, 1000 shocks /axis (DIN ISO 9022-3-31-01-1) | |
| EMV | EN 61000-6-2, EN 55011 |
| Accessoires | page 14 - 15 |
