Description
The magneto-inductive MDS-45 sensors are specially designed for industrial environments. The sensors are available in M12, M18 and M30 stainless steel housings or with a flat plastic housing. The pressure-resistant, stainless steel housing is ideally suited to harsh, industrial environments (dirt, oil, chemicals) and the food industry.
Spesification
| Model | MDS-45-M12-CA | MDS-45-M18-SA | MDS-45-M18-HP-SA | MDS-45-M30-SA | MDS-45-K-SA |
| Measuring range (standard) | 45mm (further measuring ranges see accessories) | ||||
| Offset distance | 5mm | 2.25mm | 4mm | ||
| Linearity | <±3% FSO | ||||
| Temperature stability | ±0.025 % FSO/K | ||||
| Resolution | |||||
| Frequency response (-3dB) | 1000Hz | ||||
| Electrical connection | integr. cable 3m | M8x1, 4 pin, connector (screw and snap-on) | |||
| Physical output parameter Voltage | 2V ±0.3V ...9.6V ±0.4V | 2V ±0.2V ... 9.6V ±0.4V | 2V ±0.4V ... 9.6V ±0.4V | ||
|
load (11.5V supply) ≥30KΩ load (24V supply) ≥10KΩ |
|||||
| Physical output parameter Current | 4 mA ±0.4mA ... 19.2mA ±0.8mA | 4mA ±0.8mA ... 19.2mA ±0.8mA | |||
|
resistance (11.5V supply) ≤400Ω resistance (24V supply) ≤ 800Ω |
|||||
| Storage temperature | -20°C ... +80°C | ||||
| Operating temperature | -20°C ... +80°C | ||||
| Power supply | 11.5VDC ... 30VDC | ||||
| Current consumption | max. 20mA |
max. 20mA (with voltage output); max. 40mA (with voltage output) |
|||
| Protection class | IP67 (with plug variants only in mated condition) higher protection class on request | ||||
| Pressure resistance (static) | 100 bar (at the front) | 100 bar (at the front) | 400 bar (at the front) | 40 bar (at the front) | |
| Vibration | DIN EN 60068-2-6 (20g, 58 - 500Hz) | ||||
| Shock | DIN EN 60068-2-29 (40g, 6ms, 1000 cycles) DIN EN 60068-2-27 (100g, 6ms, 3 cycles) | ||||
| EMC | EN 61326-1:2006; EN 61326-2-3:2007 | ||||
| Housing material | Stainless steel | Plastics / nickel plated brass | |||
| Weight (excluding screw nuts) | appr. 60g | appr. 40g | appr. 110g | appr. 25g | |
